What is the installation method of flexible lamp belt?

Flexible lamp with conventional divided into flexible led lamp belt and led hard light two kinds, but usually also includes the old use wire connection led lamp belt, such as flat three line 4.3 W/m, four flat line 6.48 W/m, flat five line 8.64 W/m lamp tape, etc.

1. The flexible led engineering lamp belt adopts FPC as the assembly circuit board, which is assembled with the patch led, so that the thickness of the product is only the thickness of one coin, and it does not take up space; The general specification is 30cm long, 18 LED, 24 LED and 50cm long 15 LED, 24 LED, 30 LED, etc. There are also 60cm, 80cm, etc. Different users have different specifications. And it can be cut at will, or can be extended arbitrarily without being affected. The FPC is soft and can be bent, folded and coiled, and can be moved and expanded in three dimensions without breaking. Suitable for irregular place and small space use, also because it can any bending and winding, suitable for any combination of patterns in advertising decoration.

2. The LED hard light bar is made of PCB hard board for assembling the circuit board, the LED can be assembled by the chip LED, and it is also used for assembling the LED, and different components are used depending on the need. The advantage of hard lamp is easy to fix, processing and installation are more convenient; The disadvantage is that you can't bend at will, not suitable for irregular places. There are 18 LED, 24 LED, 30 LED, 36 LED, 40 LED and so on. There are 18, 24, 36, 48 and other different specifications of the LED, with the front side and the side, and the side light is also called the Great Wall lamp.

1. The bandwidth of the four-wire lamp is about 22mm, the thickness is about 8mm, and the weight is about 0.25kg/m (4 meters per kilogram).

2. The four-wire lamp has four wires, three rows of lights, one meter and 24 lights per row, 24*3=72. Because the power of each bead is 0.05W, the power of 72 bead lamp belt is: 72*0.05=3.6W.

3. Each meter has a "scissors" mark, which can only be cut off in the mark, and it will be not bright if it is cut wrong or cut off. Some will be biased because of marking, and before cutting, take a close look at the location of the marker and cut it in the middle where there is no connection. If you look closely, you can tell.

4. Each lamp belt must be equipped with a special plug (plug with transformer); When connecting, make sure to remove the transparent plastic cover and then cover it after the test light. Do not connect directly with cover, this is easy to short circuit!

5. When the lamp belt is installed, it is usually placed in the lamp slot, and it can be set straight. It can also be fixed with a cord or wire. If you want to install or install, you need to buy another card and plug. The original card is fully transparent, should be installed after the end plug and plug place to be waterproof glass glue, such waterproof performance is better.

Taizhou ronghui lighting is mainly engaged in Christmas lights, flexible lamp belt, flexible LED lamp belt, flexible lamp belt manufacturers, processing, sales management services.