Welcome to Taizhou Ronghui Lighting Co., Ltd. official website!

News classification

Contact us

Taizhou Ronghui Lighting Co., Ltd.

Contact: Zhang Zhang

Phone: 13606826568

Phone: 0576-88879998

Fax: 0576-88321332

Address: Building 3, No. 509, Tengyun Road, Haimen Street, Jiaojiang District, Taizhou City, Zhejiang Province

Website: tzronghui.com



Flexible lamp manufacturers can not be optimistic, need to base on the enterprise management.

Your current location: Home page >> News >> Industry News

Flexible lamp manufacturers can not be optimistic, need to base on the enterprise management.

Date of release:2018-05-08 Author:ronghui tips Click:

Look at the surface cleanliness of led lights. If the led lamp is produced by SMT process, the surface cleanliness is very good, no impurities and stains can be seen. But if use hand welding production of led lights led, no matter how the surface cleaning, will remain with traces of the stain and cleaning, and will help in FPC surface residual flux and tin slag.  

                                                              Flexible lamp tape

   

The brightness of the lamp bead and the lamp bead should be consistent, the quality led lamp bead can better ensure the brightness consistency. The lamp should have the same brightness. The led light belt needs to be powered by a power source, and when the connection is too long, the output voltage will be weaker, and the brightness of the led lamp will be obviously inconsistent. Currently, the beauty of music has been able to achieve a single power supply of 30 meters.

The normal led light belt will be enclosed with the instructions and the lamp ribbon specification, and will be equipped with led lamp belt connector or card holder. There are no such accessories in the shanzhai version, because they can be saved.

The solder joints. The led light belt produced by the normal flexible lamp belt adopts SMT patch technology, which is produced by solder paste and reflow welding process. Therefore, the solder of led lamp is relatively smooth and the solder flux is not much. The welding spot is arc shaped from FPC solder to the led electrode. However, the amount of solder solder in the shanzhai led lamp is not uniform, which is more than one dot to cover the welding feet. At the same time, there will be different degrees of tin tip, which is a typical phenomenon of manual welding.

Low-end products are generally cheaper, and the quality is relatively poor, and more are less well-known small brands. And big brand flexible lamp belt manufacturer produces high quality lamp belt, adopt antistatic packaging, formal printing label, high quality soft line board, etc., price also relatively high.

Compared with home appliances and other industries, the led lighting industry relatively immature, in fact there is no shortage of market capacity, the light is led lamp belt manufacturer able to provide to meet the market demand for products has enough sales. It is only now that the led light belt manufacturers provide less products to meet the demand of the market, so it is in short supply. Led lamp manufacturers should first make the management system well, can be based on the market.

Taizhou ronghui lighting is mainly engaged in Christmas lights, flexible lamp belt, flexible LED lamp belt, flexible lamp belt manufacturers, processing, sales management services.


The address of this article:http://en.tzronghui.com/news/374.html

Key word:Flexiblelamptape,Flexiblelampbeltmanufacturer,FlexibleLEDlightbelt

Recently browse:

  • Service
  • number
    13606826568
  • Message
  • Online Service
    Please leave a message for us
    Please input the message here, and we will contact you as soon as possible.
    Full name
    Contacts
    Telephone
    Seat / mobile phone number
    mailbox
    mailbox
    address
    address